Striker - 90

The Striker 90 is an F3A style aerobatic aircraft measuring 67" span and 68" length (including spinner when fitted). 

Construction is primarily from laser cut balsa and ply with foam rear decking and fibreglass cowl, belly pan and spats. Tail feathers are sectioned and feature built up construction, as with all RCARTF models the control surfaces are pre-hinged, just needing final fixing. The aircraft is delivered pre-covered with only final assembly and finishing required as well as fitment of your choice of engine and radio. 

Whilst not a difficult model to fly, the aircraft is intended for those who have a reasonable amount of low wing experience. In flight, performance is as would be expected of this type of aircraft, smooth and responsive. Stall characteristics are predictable and controllable. The aircraft roll rate can be fast or slow, with the generous side area providing a good knife edge performance. From take off to touch down this precision  model is a pleasure to fly. Special June 08 price only £130

Requirements 90 - 120 4c, 70 - 120 2c. 5 servos, 4 function

Definately a purposeful stance

Generous side area allows for excellent knife edge performance

4 stroke engine installation with onboard glow (belly pan / Pipe tube shown removed)

Premium covering and fuel proof pre-painted parts finish what is a very  attractive aircraft.

Home|Warbirds|3D ARTF|Electric|Pattern Aerobatic|All Aircraft|Electronics|Engines|Specials|Contact