Whahaaaaaaaaayyyyyyyyyyyy

Funjet Ready To Fly EPO

A little bit of a departure form our normal field of operation but this fantastic model has impressed us so much we just had to pass on our great find.

As with other items on our website, we have the very first ones of these in this country and they are already proving an absolute storm of a hit with our customers.

Built from Expanded Polyolefin (EPO) this is one tough little cookie too. it can certainly take the knocks, however should you have a mishap with it, it can just be glued back together with a few dabs of cyano and should you have a bigger incident spares will be available from us or direct from the manufacturer.

The model comes largely complete, and ready to go. All electrics are pre-installed and all plug in components are ready soldered on the drive train and the servos have standard plugs on them which just plug into the pre-installed receiver. Channels are spread throughout the 35Mhz range so if you want an even or an odd number, just ask.Just £129.95 gets you in the air with this great fun model.

Features:
80%Factory assembled Just fix the wings and fins on - foolproof alignment.
Very light EPO material is strong and resilient to knocks
Designed for use with 11.1V 3s batteries or Nimh packs
Transmitter controlled Elevon mixing control.
5 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle +1)
Fast or slow the model is stable with great characteristics
Excellent stability and control but aerobatic too

Ready to Fly in Just Minutes!
Quick assembly Super tough, lightweight airframe!
Shock Resistant Reinforced Fuselage and Strong Wings
Superb Quality, we believe this is simply the Best RTF Plane you can find!!!
Approximately 20 minutes flight time on each charge - 10-12 minutes even at flat out.
We have not timed it but apparently good for 100kmh

Full spares availability backed by the manufacturer.

What's included:

Well, everything!!!!!!!! but for clarity here's a list.

• The airframe (of course)

• 5ch Transmitter

• 7ch Receiver

• 2 x Servos - pre-installed and connected to the elevons.

• Brushless 1500Kv motor - pre-installed and connected to....

• 18A ESC. Fully programmable ESC - ready to connect to....

• Supplied 3s Lipo battery (900mah) which can be charged through the......

• Included 12v battery charger and of course......

• A mains adaptor so you can charge at home before you go flying.

Want more, well, how about a USB lead & CD based instruction manual along with an included flight simulator so you can fly when it's dark (ok who will be first with night flying lights), spare propeller and some glue.

And of course all of the radio gear and other electronics can be used in other models, no all in 1 boards these are standard mini servos, standard receiver etc

Specification:

Dimension: 700mmX875mmX170mm

Wingspan: 875mm

Length:700mm

Height:170mm

Motor: 1800kV BL-250

ESC:18A Battery:

11.1V 3s Li-po

Notes:
The manufacturer states that it is suitable for beginners however we would always recommend that absolute beginners and those who do not feel comfortable about first flights obtain assistance from experienced flyers. We also would always recommend that you join your local model flying club and a list of these is available from the BMFA who provide a number of other benefits to the model flyer.

A full UK manual is in production and will be appearing Here