CAP 232 -120
Built for 120's we use a Moki 135 and to say
it is not too short on power would be an understatement. Whilst not
overpowered it is a nice mix if you want a good vertical performance.
Although not a super lightweight 3d model, it is still quite a light
plane as you can see from the specs below but is tough enough to cope
with the rigours of sport flying and the odd 'whoops' landing. Good
manners and a soft stall make this one of the most enjoyable everyday
models we have ever flown. Easy, unfussy, and fun to fly we love it but
we do have just one tip....... don't let anyone else fly it, you won't
get it back until the tank is dry.
A great model which will keep you coming back for more.
Features and Specs.
Fibreglass Cowl and Spats.
Included Chromed Spinner
Removable bottom Tray
Clear 'Blown' canopy
Twin elevator Servo's
Premium film covering
All fixtures and fittings.
Wing Span: 72 in /1850mm
Wing Area: 977 sq in /63 sq dm
Flying Weight:10.4 lbs/4700 g
Fuselage Length :66.1in /1680mm
Engine Required: 2c 1.20 cu in
Radio required : 4 channels, 6 servos
As with all our models, full fixtures and fittings are included.
Home|Warbirds|3D ARTF|Electric|Pattern Aerobatic|All Aircraft|Electronics|Engines|Specials|Contact