|
| F6F Hellcat
Featuring a departure from the Standard RCARTF construction methods this model now boasts a fibreglass fuselage, and what a stunner she really is. With scale detail pre-moulded into this model scale takes on a new dimension in ARTF models. Retracts and flaps as standard, pre painted canopy and a sprayed finish make for a wonderful aircraft. These are likely to be popping up at flying field all over with their owners fully equipped with a great big smile. Get yours soon.
70" 9.6lb 6 channels and 7 servo's 90 2st 120 4st
Our Price: £175
Why not try some MG995's in it, a perfect match.
|
|
|
P51D Mustang - 90
Such an inspiring sight. The american
equivalent to the Spitfire this mustang vokes all the charisma of the full size. The retracts and flaps add tonce of flying this aircraft. From take off through to landing this model of this famous warbird is a pleasure to fly. Construction is laser cut balsa and light ply ensuring an accurate model. Full hardware packs are included as always with our models, oh and yes, that does include the chrome spinner.
65.5" 8lb 6 channels and 7 servo's 60 2st 90 4st
RRP: £199 Our Price: £110 Special Offer
You may have seen something remarkably similar at an RRP of £209.99
Why not try some
MG995's in it, a perfect
match
|
|
|
P40 Warhawk - 90
From the same era as our other warbirds the P40 Warhawk complements our existing range of warbirds very nicely. This gorgeous model again features retracts and flaps as well as the standard hardware pack. Beautifully covered and finished this is no ordinary model, the attention to detail will surely impress.
63.3" 7.5lb 6 channels and 7 servo's 60 2st 90 4st
RRP: £149.99 Our Price: £120 Special Offer
You may have seen something remarkably similar at an RRP of £179.99
Why not try some
MG995's in it, a perfect
match
|
|
|
YAK 54 - 50CC
Yes, we have done it again, and surprised even ourselves. This
is our brand new YAK 54-50cc and at 85" it is quite an
impressive model. If size soesn't impress you then the quality
will. Built to an exacting standard, it is both light and strong
and with it's plug in tailplanes and wings transpoortation
should not be that big an issue.
Obviously power is a requirement on this plane and we are using
the CRRC pro 45I in this model.
6 servo's 4 functions and lots of fun.
|
|
|
Cap 232 - 120
Designed for a 120 4st but quite capable of handling a 135 Moki the impeccable handling of this model has to be tried to be believed. Needless to say, on the first flights of our demo model we had trouble getting the transmitter back. No nasty tip stall, no screwing out in tight loops, slow it down, she just slows down and descends nicely whilst remaining controllable. At 72" she flies like a proper plane should, and is capable of everything we are. Try one you'll like it.
73", 10.5lbs, 6 servos, 4-5 function
RRP £199, our price £175 Special June 08 price only £159.
Why not try some
MG995's in it, a perfect
match
|
|
|
Extra 330-90
WOW - is all we can say about our gorgeous new Extra 330. with
it's easy build using plug in wings and pre-slotted hinges it
will have you in the air in pretty short order. Designed for 4
stroke engines from 90 4c upwards this stunning model of this
favourite will please the eye, the heart and the pocket.
Engine: 90 4st 5 servo's, 4 function.
Just: £99.00
|
|
|
Katana S-53
Cute as a button, and ready for action. this gorgeous Katana is
just right.... perfectly suited to 52 four strokes and upwards
this great model is sure to please even the most discerning of
sports flyers. 55" and 5.5lb all up makes it a great little
performer too.
Engine 5 4st upwards, 5 servo's, 4 function
110
|
|
|
Yak 54 3D
Were not going to apologise for including this model in this section, yes it is a 3D Yak but just look at her. This great looking model will impress all with it's
performance and light weight. Mimicking the Katana in it's light weight laser cut balsa and ply construction with fibreglass cowling make this an absolutely stunning model
56", 5.2lbs, 5 servos, 4 function - 50 2st, 70 4st.
RRP: £149.95 Our Price £110 (No not a misprint)
|
 | Pitts
Special - Electric
What a little cracker, no, not a
stinker a cracker. despite it's smaller dimensions this one has
people drooling every time they open the box. Pictures can't do
this little model justice, get one, you won't be disappointed.
31"
span. 4 channel, 4 mini servos. Speed 400 or brushless
equivalent.
Just £60
|
|
| Cap 232 3D
This wonderful model is just bags of fun. Again built using light weight construction of laser cut balsa and ply this cute little airplane makes a big impression both on the flyer and those watching. From the light weight fibreglass cowl through it's glitter trim and see through film right to it's large rudder and elevator, this great little 3D model will certainly impress.
35.8" 17.6oz, 4 chchannels - 3 servo 1300- 1800 Lipo Speed 400 g/box 5:1 or brushless equiv.
Just £59.
|
|
| AirBallet
So you think you have a good profile? Well so do we. This excellent little profile 3D model is perfectly suited to 1200 mAh Lipo's and brushless 400 size motors. Add a few mini servo's, a receiver, an 18amp speed control and you're good to go. again, as you would expect with a 3D model - outrageous performance and wild maneouvers are all possible with this model. Have fun :-)
31" Span, 1.16lb, 4 channels 3 mini servos
Our Price: £45 Special Offer
|
|
|
Yak 54
50
Were not going to apologise for including
yet another Yak. This great looking model will impress all with it's
great looks. Fibreglass fuselage and plug in wings made from light weight laser cut balsa and ply construction with fibreglass cowling make this an absolutely stunning model
52",
6lbs, 5 servos, 4 function - 50 2st, 70 4st.
RRP: £149.95 Our Price £110 (No not a misprint)
|
|
|
Striker 90
This stunning aircraft has impressed us immensely. Now re-designed to feature two part fibreglass cowl with the bottom half acting as a pipe tube (standard exhausts can also be used), one piece jig built wing for accuracy, closed loop rudder control and
seperate elevators for precision trimming. This model makes one superb F3A practice model but is also great for improving your aerobatics and taking 'B' certificate tests. Assemly is quick and straight forward to produce an amazing model.
67" 4 channels, 5 servo's 70 2st 90 4st +
RRP: £179.95 Our Price: £145 Special June 08 price only £130
Why not try some MG995's in it, a perfect match.
|
|
|
Fashion 50
Just as stunning as the Striker 90 above this beautiful 50 size aerobatic is the smaller cousin to the Striker. Again, following the standard construction as the majority of the RCARTF range this model is constructed of light weight laser cut balsa and ply parts. Fibreglass cowling and ABS spats make this into an aircraft that performs as well as it looks and that's got to be good right!
56" 4 channels, 5 servo's 50 2st 70 4st
RRP: 149.99 Our Price: £115 Special June 08 price only £99
Why not try some MG995's in it, a perfect match.
|
|
| Tower Pro MG 995
We are currently stocking the Tower Pro MG995 servo. This metal geared digital servo is an
excellent match for many of our aircraft. It has the power to cope with the largest of our aircraft and being metal geared won't strip a gear should you happen to bump it. Each servo comes with a connector suitable or use with either JR or Futaba as well as the majority of radio's on the market.
Each servo includes a full set of horns, mounting rubbers (grommets) as well as ferrules and mounting screws.
RRP: £14.99 Our Price: £13.99 Each.
Oh, and they are in stock by the way!!
Free Postage on this item !!!!
|
Specifications:
7 LED array
Selectable Voltage
Doubles sided tape mount
Operating voltage: 4.8-6V |
Tower Pro Voltage Monitor
The new voltage monitor from Tower Pro is capable of working from either 4.8 or 6v at the flick of a switch. Simply plug in and mount the unit using the included self adhesive strip to protect your model from a flat battery. Simply plug it into either a spare channel or a Y lead socket for an instant and live check on the status of your battery before you fly. Can also be used on our upcoming range of 26 and 45cc petrol engines to monitor the voltage of the power supply. The bright LED's show up well from a distance and the changing colours indicate when to re-charge.
Each unit is complete and ready to go £12.00 on your local.
Our Price: £7.00 Special June 08 price only £3.95 Each. (and post free too!!!!)
Of course, they are in stock by the way!! and ready for immediate despatch. |
Specifications:
30cm long.
JR Colour Coding (Orange Signal)
Gold plated Connectors
Proper multi fit socket |
30 Cm Extension leads
Fed up with cutting the tang off of Futaba type plugs? Fed up with loose fittings? Fed up with cheap connectors which are not gold plated. So were we, and now we have the solution. 30cm long, gold plated connectors, and multi fit socket which will take any major brand of servo plug without modification (Tang and chamfer to suit Futaba and JR whilst ensuring correct polarity) . What's more, the sockets are an excellent fit and will reassure you that they will not come apart until you want them to.
Our Price: £1.50 Each. (and post free too!!!!)
Of course, as with everything here at rcartf, they are in stock and ready for immediate despatch. |
|
|
Pro 26I
We're sure you
will have heard about the fantastic engines. From their included
Exhaust, electronic ignition and Walbro Carbs they are a fantastic piece
of engineering. Easy starting, and reliable running are just some of the
benefits. Add to these their light weight (1150g) included standoffs and
toolkit, and then look at the price. And we think you will agree that
they are fantastic value.
2.4Ps @ 9000RPM
Our Price: £130
|
|
|
Pro
45I.
The bigger of
our current 2 stroke petrol engines includes many of the features of
the 26I but in a bigger package. Bigger doesn't necessarily mean
much heavier either and at 1650 g, with an output of 4.2 hp it will
swing a 20 – 22” prop with ease. Giving you plenty of grunt
Our Price: £149
|
|
Gift Vouchers
|
Coming Soon
|